266 catalog e 074484 04/04 edition 6 www.erni.com size r size r/2 size r/3 reversed style, acc. to din 41 612/iec 60603-2 reversed style, short version of size r reversed style, third-length of size r dimensional drawings male connector
catalog e 074484 06/06 edition 6 www.erni.com 267 din 41612 ordering informations male connectors contact supporting press-in tool other versions on request. 004993 023419 023422 023423 004480 433780 004502 023424 0,8 mm early make/last break contacts are possible at all positions. 414691 414690 414688 414687 593411 593410 593414 593413
268 catalog e 074484 04/04 edition 6 www.erni.com ordering informations male connectors with transfer-zone contact supporting press-in tool 023425 023426 023427 023428 1) terminals nickel-plated over full length. transfer-zone (5.0 mm) hard gold-plated. other versions on request. 0,8 mm early make/last break contacts are possible at all positions. 414700 414699 414703 414702
catalog e 074484 06/06 edition 6 www.erni.com 269 din 41612 application example in order to avoid any incorrect connections being made which could lead to the damage of sensitive electronic equipment due to overload, provisions are available for coding the connector halves. connector sizes b/2, b/3, c/2, c/3, m and the inverse versions are provided with this integral coding. the integral coding is accomplished by breaking off (with pliers) the coding tab positions on the male connector. coding slots are made on the corresponding locations as well on the female connector. for information on coding systems, please contact the local erni sales office.
|
